Front Door Replacement Cost in Las Vegas

These are published estimates from the sources named in the table, sampled September 29, 2026. They are not Agave Windows job history and they are not a quote. National figures describe a typical market, not Las Vegas specifically, and each publisher defines its own scope, so read the scope column before comparing two rows. Use them to set a budget bracket, then use the rest of this guide to see why two proposals inside the same bracket can describe different work.

The two Las Vegas rows show the decision this guide is about. A steel unit in the existing opening is a product swap with a new frame and threshold. A wider entrance with sidelights is a framing project that happens to end with a door. The survey averages in between mostly describe the first kind of job.

Agave Windows will publish its own dated, scoped ranges here as measured proposals accumulate. Until then, the published figures above are the budget reference on this page.

Take photographs from the street side and from inside. Include the threshold, frame, adjacent glass and any decorative surround. Describe what you want to improve: appearance, operation, privacy, a worn finish or a specific fit problem. If the door binds or water appears nearby, explain when it happens.

A useful budget begins with these observations rather than a material choice alone, and the entry door buying guide shows how to record them. A new slab cannot be assumed to correct a damaged frame, an uneven threshold or a problem in the surrounding wall. Assessment helps establish whether retained components are suitable for the planned replacement.

A slab refers to the door panel. A slab replacement depends on compatibility with the existing frame, hinge locations, hardware preparation and dimensions. It can require careful fitting, and the existing assembly must be evaluated before the scope is selected.

Ask whether finishing, hardware transfer, new hinges and adjustment are included. A door panel advertised separately may leave several of these responsibilities to the buyer. Do not compare its retail price directly with a complete installed entrance.

A framed assembly can include the door, jambs and threshold, with hardware and glazing specified separately or as part of the package. Confirm the actual contents; terminology alone is not a complete bill of materials. Removal and connection to existing finishes also need to be described.

Sidelights and transoms add their own dimensions, glass and frame decisions. When those elements are part of one assembly, replacing only the central door may not deliver the appearance or condition you expect. Ask which components remain and how their finish will relate to the new work.

Keep this list with every proposal. When one includes a line another omits, ask whether the work is included elsewhere, unnecessary for that approach or excluded. An unanswered blank should not be treated as a zero cost.

Fiberglass, steel and wood doors have different construction and finish possibilities, which we set out in entry door materials compared. The meaningful budget comparison is between identified products suitable for the entrance, with comparable glazing, hardware and installation. A material label does not tell you the quality of every component or the maintenance conditions.

Discuss sun exposure, shelter and the manufacturer's finish and care requirements. A finish that needs particular maintenance creates an ownership responsibility even when its purchase price is attractive. Ask whether factory finishing is included and whether site finishing would affect the schedule or coverage.

Decorative glass can change both the appearance and the specification, as the glass entry doors page describes. If you compare a solid panel against a glazed design, you are changing more than the face style. Review privacy under the lighting conditions that matter to you and confirm the performance information for the actual assembly.

Request a Front Door Estimate

Mark the door leaf, jambs, threshold, sidelights, transom, interior casing and exterior trim as retained, replaced or still under assessment. This map makes the budget boundary visible before materials are chosen.

Retained does not mean untouched. Reusing a lock may still require compatible preparation and adjustment; retaining interior trim may require careful removal and reinstallation. Conversely, a new framed assembly does not automatically include new decorative casing or repainting the surrounding wall. Price the actual activity associated with each component.

Sidelights deserve particular care because a separate-looking glass panel can be part of a coordinated entrance assembly. Establish whether it is structurally and dimensionally independent of the central frame. If the selected door system changes that relationship, include the new frame, glass and surrounding restoration rather than price the sidelight as glass alone.

A new handle is not always interchangeable with the existing lock preparation. Door thickness, backset, hinge arrangement and the selected locking system can limit compatible choices. Multi-point hardware and connected locks require product-specific confirmation; a preferred accessory should not be assumed to fit. Our design center page on door hardware choices covers the main options.

Clarify whether the budget includes hardware supply, installation, adjustment and any agreed setup. If you want to reuse a lock or key system, raise that before the order is finalized. Also identify who is responsible for keys, access codes and any account configuration for connected equipment.

The visual finish should be selected together with nearby hinges, exterior lighting and house numbers. Coordinating the entrance does not require replacing every accessory, but it helps to know which changes are in the project and which remain your responsibility.

The entrance joins different surfaces and elevations. Interior flooring, exterior landings, trim and weather exposure affect the transition. A different frame or threshold can reveal gaps or unfinished areas that the old assembly concealed.

Ask what happens if the new trim covers a different area, whether painting extends beyond a small patch and how texture matching is handled. Exact matches to aged finishes may not be possible. A written explanation is more useful than an undefined promise to make everything look new.

If the project changes the width, height or adjacent glazing, establish the additional design and construction questions first. That work should be separately defined rather than hidden inside a premium-door description. Permit and HOA approval responsibilities depend on the property and proposed work.

Start with a required entrance outcome: appropriate fit, a defined privacy level, compatible locking and a finished transition. A baseline is the least elaborate complete scope that meets those needs, not simply the lowest door-panel price.

For a hypothetical entrance with a damaged frame, Proposal A supplies a new slab and reuses the frame. Proposal B replaces the framed assembly. Adding the cost of decorative glass to A does not make it comparable to B; the retained damaged component remains an unresolved premise. Establish the suitable repair or replacement extent first, then compare appearance options within that scope.

In a second hypothetical comparison, both quotes include a suitable prehung assembly. One includes factory finish and compatible hardware; the other leaves finishing and the handle to the homeowner. List those omissions explicitly. Obtain their actual supply, preparation and installation prices before treating the totals as equivalent.

Use a separate option line for a glass design, finish or handle. If an option also requires different lock preparation, a thicker door or a changed frame, record the dependent changes. The upgrade price is the cost of the compatible package, not the price difference between two visible handles.

Read the written estimate for work, materials, payment terms and schedule assumptions. The FTC's contractor guidance supports comparing written estimates and clear contracts. A deposit, a product price and a complete installed contract total are different figures and should be labeled accordingly.

The backset is the distance from the door edge to the center of the main lock bore. Door thickness, bore size, hole spacing and the locking system are additional compatibility checks. If those features do not match, buying a preferred handle does not establish that it can be installed without further work.

Schlage's door-preparation checklist illustrates those checks and also calls attention to alignment. Its stated dimensions apply to the hardware it describes; use the exact new lock and door instructions for your order. Do not enlarge holes or alter a rated or warranted assembly based on a generic measurement list.

For budgeting, assign each required change to a scope: compatible hardware supply, permitted preparation, frame correction or a different assembly. If a connected lock is selected, distinguish installation from account setup and recurring services. Only actual agreed services belong in the proposal.

When you request a front door estimate, tell Agave which features are essential and which are options. Include photographs, the approximate opening arrangement, your preferred look and any known HOA requirements. Professional measurement and scope review establish the final order; homeowner measurements are useful context.

Ask for product details, inclusions, exclusions, payment terms, proposal validity and separate product and installation coverage. Those records help you understand both the project price and what happens after installation.

Request a Front Door Estimate